BHZML - DE TREY FIX ADHESIVE

  • MSDS: BHZML
  • Manufacturer: DE TREY DIV DENTSPLY
  • Product Name: DE TREY FIX ADHESIVE
  • National Stock Number: 6520-00F010847
Product Identification

Product ID:DE TREY FIX ADHESIVE
MSDS Date:09/12/1985
FSC:6520
NIIN:00F010847
MSDS Number: BHZML

Responsible Party
DE TREY DIV. DENTSPLY
570 WEST COLLEGE AVENUE
YORK, PA 17405

Emergency Phone: (717) 845-7511

Info Phone: (717) 845-7511

Cage: FO537

Contractor
DENTSPLY/YORK DIV/TRUBYTE DIV
872 YORK, PA 17405-0872 US

Telephone: 717-845-7511

Cage: 16969

Ingredients

XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN/EYES: IRRITATION. INHALATION:
IRRITATION OF THE MUCOUS MEMBRANES & NARCOSIS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN/EYES: IRRITATION. INHALATION: IRRITATION
OF THE MUCOUS MEMBRANES & NARCOSIS.

First Aid

First Aid:EYES: FLUSH THOROUGHLY W/WATER & SEEK MED ATTN. INHALATION:
REMOVE TO FRESH AIR & SEEK MED ATTN. INGESTION: WASH MOUTH W/WATER
& SEEK MED ATTN. SKIN: WASH W/SOAP & WATER.

Fire Fighting

Flash Point Method:TCC
Flash Point:74F
Lower Limits:1.0%
Upper Limits:7.0%
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Unusual Fire/Explosion Hazard:CAN GIVE TOXIC FUMES DURING IGNITION.

Accidental Release

Spill Release Procedures:ABSORB ONTO SAND OR EARTH. SHUT OFF ALL
SOURCES OF IGNITION & VENTILATE AREA.

Handling

Handling and Storage Precautions:AVOID FOODSTUFFS.

Exposure Controls

Respiratory Protection:SELF-CONTAINED FOR BULK HANDLING.
Ventilation:LOCAL EXHAUST: PREFERRED.
Protective Gloves:SOLVENT RESISTANT
Eye Protection:GOGGLES
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:279-292F
Vapor Pres:40-45
Vapor Density:3.66
Spec Gravity:0.86
Solubility in Water:INSOLUBLE

Stability

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:VARIOUS AROMATIC HYDROCARBON PRODUCTS
& TOXIC FUMES

Disposal

Waste Disposal Methods:REMOVE ABSORBENT MATERIAL & SEEK PROFESSIONAL
DISPOSAL. CHECK LOCAL ENVIRONMENTAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.